Grand Routeur CNC 3 axes
Grand Routeur CNC 3 axes avec tourne cylindre, changeur d'outils et table à dépression.
Dimensions usinables : 1500mm * 2400 mm * épaisseur en fonction d'autres paramètres (martyre, longueur de la fraise,...)
Changeur d'outils : 8 outils
Aspiration à copeaux de bois, circuit de bain d'huile pour la découpe de métal.
Composed of several units :¶
A cooler for the spindle motor.
A dust collecting system .
A vacuum table .
A tool changer .
The control unit and the remote control .
Remote control¶
To control the position you click the X,Y or Z arrow the + or - invert the direction of the motion. The fast/slow key change the motion key when you continuously press the motion key and when you make a short click it modify the precision of the displacement.
The XY->0 fixed the G54 home in X and Y The ZC->0 fixed the G54 home in Z
The C letter is a wrong labelling it should be B for the rotation along the Y axis.
The Toolset is an automatic Z , you have to use an electric sensor that measure the contact between the spindle and the sensor. It’s a precise way to determine the Z.
The Toolswitch allow you to change of tool. The tool changer has 8 position.
The File allow you to select your file on the usb key. You confirm with the yellow OK key. And you start the job by clicking the green run/pause key
Post-processeur Fusion¶
sélectionner le post-processeur mach2MILL
dans la liste
NON FONCTIONNEL : Installer et sélectionner le post processeur suivant : attachment:mllaser agrilab.cps
Quelques tutoriels pour en apprendre plus:
https://www.instructables.com/classes/tagged/cnc/
https://academy.titansofcnc.com/
Informations technique et formules pour référence
https://www.sandvik.coromant.com/fr-fr/knowledge/milling/pages/default.aspx (guide en français)
http://www.mmus-carbide.com/technical_information
http://www.mmus-carbide.com/technical_information#section-2 (formules)
https://wiki.harvard.edu/confluence/display/fabricationlab/Choosing+Toolpaths (stratégie de coupe)
https://wiki.harvard.edu/confluence/display/fabricationlab/Choosing+Tools (type de fraise)
https://wiki.harvard.edu/confluence/display/fabricationlab/Selecting+a+Stepover (pas de recouvrement)